Gas Type Conversion of Bromic Gas Heaters
Written by Rett Rasmussen
Updated at October 15th, 2026
- Prices/Polices
- Installation Manuals
- Brochures / Literature
- Log Set Compositions/Sizing
- Bromic Patio Heaters
-
Solaire Infrared Grills
Solaire Training Solaire Portable Infrared Grills Solaire 27XL Solaire 42 Solaire Side Burners Solaire Island Accessories Solaire Accessories Solaire 21 Solaire 36 Recipes Testimonials Solaire 27 Solaire 30 Solaire 56 Solaire Accent Solaire Demo Program Solaire Warranty Solaire 21XL Solaire 56T Unboxing - What's Inside Solaire "How To" Videos
- Vented Gas Logs
- Chillbuster Vent-Free Gas Logs
- Alterna (FireBalls, FireStones, FireGlitter)
- Electronic Ignition Systems
- FirePits
- Regulatory Issues
- Google SketchUp Models
- Testimonials
- Featured Articles
-
Prices/Polices
-
Installation Manuals
-
Brochures / Literature
-
Log Set Compositions/Sizing
-
Bromic Patio Heaters
-
Solaire Infrared Grills
-
Vented Gas Logs
-
Chillbuster Vent-Free Gas Logs
-
Alterna (FireBalls, FireStones, FireGlitter)
-
Electronic Ignition Systems
-
FirePits
-
Regulatory Issues
-
Google SketchUp Models
-
Testimonials
-
Featured Articles
Table of Contents
Changing the heater to operate on one gas type from another requires:
- Changing the Injectors (Burner Orifices); and
- Setting the outlet pressure at the control valve to the appropriate pressure.
You may purchase Injectors (Burner Orifices) from our webstore at https://besthot.store/BH8080016/ (Select the appropriate gas type for the actual gas type on which the heater will be operated.
Video instruction on how to change the injectors (burner orifices) is at https://youtu.be/MtJNmoIgvys
Using a manometer, you will also need to adjust the gas outlet pressure at the regulator portion of the control valve in the heater's control bracket to either:
- Natural Gas = 5.0 inches of water column pressure; or
- Propane = 10.0 inches of water column pressure
Video instruction begins at 1:16 at https://youtu.be/OJ-EVF5PziI
Are Bromic gas-heater outlet pressures set before shipment?
Bromic installation instructions place responsibility for outlet-pressure setup and verification on the installer.
Heaters distributed by Rasmussen receive an additional pre-shipment check: Rasmussen operationally tests the Platinum and Tungsten gas heaters it distributes and sets outlet pressure before shipment, pairing the tested control bracket and heater head together.
Installers should still follow the current Bromic commissioning instructions and verify required pressures during installation.
Popular Articles
- 2026 MSRP Price List for Rasmussen Gas Logs, Alterna Contemporary Gas Fires and Chillbuster Vent-free log sets. Effective Date = October 5, 2026. ANB Product Announcement.
- How to light the pilot on your gas log set - general instructions
- Identification of Burner Features to Clean - Vent-Free Gas Log Sets
- Rasmussen Vented Gas Logs Brochure
- 2026 Solaire Retail Price List, PDF and XLS format, effective March 26, 2026
- Platinum Gas shuts down after a short time
- Alterna Vent-free (AFB FireBalls, AFG FireShapes, AFS FireStones) Instruction Manual
- How To Remove the Burners in the AllAbout Solaire Grills
- #1 Vent-Free Issue - Nuisance Shutdown (or difficulty lighting) ODS Pilot